Friday, October 3, 2008

Expand C: drive for Virtual Server

Before you begin, make sure that you do not have an active snapshot on the VM, extending a virtual disk with a snapshot will cause corruption

Extend the boot volume of Windows Server 2003 Virtual Machine

To start, I have a Windows Server 2003 Virtual Machine that has a 5.3G disk allocated to it, I need to expand this disk to 10G.

clip_image002

Step 1: Power off the virtual machine that holds the boot volume that you want to extend.

Step 2: Make a backup copy of your virtual disk, this is optional but if you mess up don't call me unless you're willing to pay.

Step 3: From the service console, increase the size of the .dsk or .vmdk virtual disk file. This can also be accomplished through the Virtual Infrastructure Client if you are using VirtualCenter 2.x+.

[root@esx-test local]# ls -lah test.vmdk

-rw------- 1 root root 5.4G Jul 18 13:57 test.vmdk

Extend the virtual disk with vmkfstools. The input to the -X switch is the size that you want the disk file to be not the size you want to extend the disk file by.

[root@esx-test local]# vmkfstools -X 10G test.vmdk

View the new size of test.vmdk

[root@esx-test local]# ls -lah test.vmdk

-rw------- 1 root root 10G Jul 18 13:57 test.vmdk

Step 4: For this step you will need an additional Virtual Machine running Windows Server 2003. Power off the second Virtual Machine, and add the disk from the first Virtual Machine to it through the mui. Power up the second Virtual Machine and verify that the imported disk has unallocated space on it.

clip_image004

From the run menu type "diskpart.exe" to enter the command line utility to resize disk partitions in Windows Server 2003.

clip_image005

The command list volume will show you all the available volumes. Select your volume as shown below. select volume 1 corresponds to the "D" volume that I want to extend. Finally extend the volume with the extend command.

clip_image007

If all goes well, the partition will be immediately extended under the Disk Management snap in.

clip_image009

Step 5: Shut down the second Virtual Machine and remove the disk from the second Virtual Machine. Power on the first Virtual Machine and check out your new space.

clip_image011

No comments: